Course Schedules


( HYG 220 ) Clinical Dental Hygiene III

Students will continue development in the areas of patient management, preventive dental hygiene treatment and proficiency in clinical techniques through practical application. Current advances in dental hygiene services will also be introduced. This course will offer continued development of proficiency in clinical techniques and current procedural practices of the dental hygienist with emphasis on self-evaluation. Travel to enrichments sites is mandatory and transportation is the responsibility of the student. PREREQUISITE: HYG 204 Periodontics; HYG 212 Clinical Dental Hygiene II

6.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  FHTC M121 08/20/2019 - 12/19/2019 10:00 AM - 12:00 PM W Cheryl Bosiljevac
 

( IET 113 ) Industrial Electricity

Students will identify the proper equipment, materials and tools used in industrial settings. Students will be introduced to industrial symbols, and electrical schematics. The students will define current, voltage, and resistance as they relate to all values of electricity. Students will identify types of fuses and circuit breakers use in industrial settings. Alternating current will be explained.

4.00 Credit Hours


  Section: A

Seats Available: 15 of 26  

Online Location Dates Time Meeting Days Instructor
  TECH T105 08/19/2019 - 10/15/2019 12:15 PM - 03:30 PM M T W R Christopher Wilson

  Section: Z

Seats Available: 2 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T105 08/19/2019 - 10/14/2019 04:00 PM - 07:30 PM M W Cody Wright
 

( IET 114 ) Industrial Wiring

Students will calculate the size of electrical loads and determine wiring applications for supply, feeder and branch circuits. Wiring AC circuits will include the wiring of industrial devices such as transformers, relays and timers. Study and application of industrial electrical symbols, solenoids, and single phase motors will be included. Emphasis will be on developing wiring competencies required by industrial equipment. Applied communications skills will be included. PREREQUISITE: IET 113 Industrial Electricity.

4.00 Credit Hours


  Section: A

Seats Available: 16 of 26  

Online Location Dates Time Meeting Days Instructor
  TECH T105 10/16/2019 - 12/20/2019 12:15 PM - 03:30 PM M T W R F Christopher Wilson

  Section: Z

Seats Available: 3 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T105 10/16/2019 - 12/18/2019 04:00 PM - 07:30 PM M W Cody Wright
 

( IET 115 ) Residential Wiring I

Students will identify the proper tools, and develop high standard skills in maintenance, troubleshooting, installing, as well as repairs in residential wiring. Students will use Ohms Law principles to understand the theory of electricity, and practice wiring different circuits common to residential wiring. Students will demonstrate proper method of installing parallel as well as series circuits using multiple switches and loads. Students will utilize the National Electric Code to understand the requirement for installing an electrical system that is essentially free from hazard and safeguards persons and property from hazards arising from the use of electricity.

4.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  TECH T105 10/16/2019 - 12/19/2019 08:15 AM - 11:30 AM M T W R Christopher Wilson

  Section: Z

Seats Available: 5 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T105 10/17/2019 - 12/19/2019 05:00 PM - 08:30 PM T R Richard Rust
 

( IET 120 ) Electrical Troubleshooting

This class will cover all aspects of troubleshooting electrical systems. The course will focus on electrical system applications, step-by-step troubleshooting procedures, and hands-on troubleshooting activities that reinforce the concepts presented. The course will also touch on concepts concerning NFPA 70E® requirements, and motor nameplate interpretation. PREREQUISITE: IET 213 Motor Controls.

4.00 Credit Hours


  Section: Z

Seats Available: 11 of 16  

Online Location Dates Time Meeting Days Instructor
  TECH T105 10/16/2019 - 12/18/2019 04:00 PM - 07:30 PM M W Christopher Wilson
 

( IET 213 ) Motor Controls

Students will construct typical circuits based on ladder diagrams and wiring diagrams for single-phase and 3-phase electric motors. Control stations will include stop/start pushbuttons, selector switches, photo-eyes, limit switches, and toggle switches. Diagrams of single stations, dual stations, jogging, and reversing push button stations will be included. Interlocking of motor starters will include mechanical, electrical, and push button interlocks. Timers and relays will be used in conjunction with motor control circuits’ in general industrial plant applications. Devices such as pilot light will be added to each circuits as well as proper fuse control, and safety disconnects. PREREQUISITE: IET 113 Industrial Electricity; IET 114 Industrial Wiring

4.00 Credit Hours


  Section: Z

Seats Available: 9 of 14  

Online Location Dates Time Meeting Days Instructor
  TECH T105 08/19/2019 - 10/14/2019 04:00 PM - 07:30 PM M W Christopher Wilson
 

( IET 214 ) Programmable Controllers

Students will operate and define the capabilities of programmable controllers, applying the latest technology in industrial computer use. Learning to create programs utilizing relays, switches, and BOOL logic will provide opportunities for creating industrial applications. PREREQUISITE: IET 213 Motor Control

4.00 Credit Hours


  Section: A

Seats Available: 4 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 08/19/2019 - 10/15/2019 12:15 PM - 03:30 PM M T W R F David Budke

  Section: Z

Seats Available: 8 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 08/19/2019 - 10/14/2019 04:00 PM - 07:30 PM M W David Budke
 

( IET 217 ) Instrumentation

In this course students will learn how to properly install, maintain, program, and troubleshoot a variety of industrial instruments and control systems. Students will install and troubleshoot a variety of sensors to include temperature, pressure, level, and flow. Students will set-up and configure motion systems utilizing Kinetix servo drive systems. PREREQUISITE: IET 214 Programmable Controllers; IET 246 Engineering Energy Applications

4.00 Credit Hours


  Section: Z

Seats Available: 15 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 08/20/2019 - 10/15/2019 04:00 PM - 07:30 PM T R David Budke
 

( IET 231 ) Mechatronics

Students will identify the basic types of conveyer mechanical drives used in industry. This includes the wiring, installation and design of conveyer systems drive systems well as programming the variable drives used to drive the system. PREREQUISITE: Completion/Concurrent enrollment IET 233 Industrial Mechanical Principles.

4.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 10/16/2019 - 12/19/2019 08:15 AM - 11:30 AM M T W R David Budke

  Section: Z

Seats Available: 8 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 10/17/2019 - 12/19/2019 05:00 PM - 08:30 PM T R Christopher Maltbie
 

( IET 233 ) Industrial Mechanical Principles

Students will develop the skills to draw, layout, assemble, disassemble, fabricate, maintain and calculate loads for mechanical equipment used in industry and manufacturing. Print interpretation and basic mechanical drawing will be utilized.

4.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 08/19/2019 - 10/15/2019 08:15 AM - 11:30 AM M T W F David Budke

  Section: Z

Seats Available: 8 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T121 08/20/2019 - 10/15/2019 05:00 PM - 08:30 PM T R Christopher Maltbie
 

( IET 243 ) Hydraulics and Pneumatics

Students will develop skills to construct both hydraulic and pneumatic systems. This course provides comprehensive instruction in the fluid power field, ranging from historical information to details on the design and operation of hydraulic and pneumatic components, circuits, and systems. The approach used throughout this course is based on developing an understanding of the operation of fluid power component parts and circuits.

4.00 Credit Hours


  Section: A

FULL  

Online Location Dates Time Meeting Days Instructor
  TECH T105 08/19/2019 - 10/15/2019 08:15 AM - 11:30 AM M T W F Christopher Wilson

  Section: Z

Seats Available: 4 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T105 08/20/2019 - 10/15/2019 05:00 PM - 08:30 PM T R Richard Rust
 

( IET 246 ) Engineering Energy Applications

Students will learn the advanced operations and capabilities of programmable logic controllers and logic relays. Programming will include CompactLogix controllers as well as touch screens and variable frequency drives. Rockwell RS Logic software will be applied to actual industrial problems. Software includes Studio 5000 and RSLinx. PREREQUISITE: Completion/ Concurrent Enrollment IET 214 Programmable Controls

4.00 Credit Hours


  Section: A

Seats Available: 4 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 10/16/2019 - 12/20/2019 12:15 PM - 03:30 PM M T W R F David Budke

  Section: Z

Seats Available: 8 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 10/16/2019 - 12/18/2019 04:00 PM - 07:30 PM M W David Budke
 

( IET 254 ) Troubleshooting

Troubleshooting principles and techniques will be developed for all the mechanical, electrical and electronic equipment utilized in the Industrial Engineering Associate of Applied Science degree program. Simulation software is utilized to expose students to many scenarios in a brief amount of time. Troubleshooting basics are taught in a semester but mastered in a career. IET 250: Internship can be taken in place of this course with proper approval of placement. PREREQUISITE: IET 214 Programmable Controllers; IET 217 Instrumentation; IET 246 Engineering Energy Applications

4.00 Credit Hours


  Section: Z

Seats Available: 15 of 15  

Online Location Dates Time Meeting Days Instructor
  TECH T107C 10/17/2019 - 12/19/2019 04:00 PM - 07:30 PM T R David Budke
 

( IMD 120 ) Principles of Computer Graphics

This course will focus on a variety of multimedia and computer based graphics fundamentals. These core concepts will be built upon in future Interactive Multimedia Design courses at FTHC. Students will begin by defining multimedia and exploring how computer graphics have evolved over the years. Visual communication, usability and interactive design concepts will be introduced. Static and time-based media will be explored as well as industry standard terms and concepts relating to computer based graphics.

3.00 Credit Hours


  Section: O

Seats Available: 2 of 15  

Online Location Dates Time Meeting Days Instructor
08/19/2019 - 11/08/2019 NA Diana Wilhite
 

( IMD 125 ) Digital Storytelling

Telling a story through a digital medium presents many challenges and opportunities. Students will learn to combine technical skills with the art of storytelling. Experimenting with a variety of sound, still image, and video editing tools, students will learn to choose the right tool for the job. Students will develop storytelling skills including brainstorming, storyboarding, and developing a digital story. Opportunities to use digital stories in corporate training environments, classrooms, entertainment, game development, and other avenues will be discussed as well as the future of digital storytelling.

3.00 Credit Hours


  Section: O

Seats Available: 10 of 15  

Online Location Dates Time Meeting Days Instructor
08/19/2019 - 12/19/2019 NA Casey Wilson
 

( IMD 131 ) 3D Graphics and Animation I

In this course, students will be introduced to concepts in computer modeling and basic animation. Students will complete a project that involves creating standard primitives, polygon modeling, creating materials, lights, and cameras, and finally, animating and rendering a scene. The concept of keyframing will be discussed in detail and the use of Autokey and Set Key modes in 3ds Max. Important techniques in file management and maintenance on the computer workstation will also be covered.

3.00 Credit Hours


  Section: A

Seats Available: 2 of 15  

Online Location Dates Time Meeting Days Instructor
  DWN DC312 08/20/2019 - 12/19/2019 08:00 AM - 10:00 AM T R Casey Wilson

  Section: O

Seats Available: 10 of 15  

Online Location Dates Time Meeting Days Instructor
08/19/2019 - 12/19/2019 NA Casey Wilson
 

( IMD 140 ) Digital Video Production I

Students will be introduced to the basics of videography, the use of tripods and camera heads, lighting, and microphone usage. Basic editing will also be covered. Students will gain hands experience in shooting, composition and editing. The art of storytelling through the use of visual imagery will be covered. The audio portion of a video project will also be introduced, including use of microphones, audio processing software, noise reduction and compression.

3.00 Credit Hours


  Section: A

Seats Available: 12 of 15  

Online Location Dates Time Meeting Days Instructor
  DWN DC301 08/19/2019 - 12/18/2019 01:00 PM - 03:00 PM M W Casey Wilson

  Section: Z

Seats Available: 14 of 15  

Online Location Dates Time Meeting Days Instructor
08/19/2019 - 12/19/2019 NA Casey Wilson
  DWN DC313 09/13/2019 - 09/13/2019 08:00 AM - 03:00 PM F Casey Wilson
  DWN DC313 11/01/2019 - 11/01/2019 08:00 AM - 03:00 PM F Casey Wilson
 

( IMD 150 ) Photoshop for Multimedia

During this course, students will be introduced to Adobe Photoshop and discuss visual communication as a multimedia professional. We will start by getting to know the workspace, tools and panels available in Photoshop. Next, we will explore selection techniques, painting and retouching, layers, smart objects, and filters. Concepts such as RGB vs. CMYK, image resolution, and file formats will be discussed. Finally, we will look at how to effectively create images for web, video, and other multimedia products.

3.00 Credit Hours


  Section: A

Seats Available: 1 of 15  

Online Location Dates Time Meeting Days Instructor
  DWN DC301 08/19/2019 - 12/18/2019 08:00 AM - 10:00 AM M W Casey Wilson

  Section: O

Seats Available: 11 of 15  

Online Location Dates Time Meeting Days Instructor
08/19/2019 - 12/18/2019 NA Casey Wilson
 

( IMD 222 ) Compositing II

Compositing II will give students the opportunity to expand upon their compositing and animation skills in Adobe After effects. Students will continue to develop their keying, animating, masking, keyframing, and compositing skills. More advanced projects including logo animation and show intro animations will be worked on. Controlling animation through “expressions” will also be introduced. The composites created in this course will be used to supplement projects in the Digital Video Production courses as well. Students will learn to develop a practical “workflow” when working in multiple software packages to complete a project. Prerequisite: IMD 190 Compositing I

2.00 Credit Hours


  Section: A

Seats Available: 14 of 15  

Online Location Dates Time Meeting Days Instructor
  DWN DC301 08/20/2019 - 11/21/2019 01:00 PM - 03:00 PM T R Casey Wilson
 

( IMD 230 ) Interactive Multimedia II

This course picks up where IMD 180 Interactive Multimedia leaves off and continues more in depth with Action Script – which is the programming language for Flash. Knowledge of Action Script is a must for control of nearly all advanced features in Flash. Student will focus on creating more complex and interactive projects in Flash. Prerequisite: IMD 180 Interactive Multimedia I

3.00 Credit Hours


  Section: A

Seats Available: 13 of 15  

Online Location Dates Time Meeting Days Instructor
  DWN DC301 08/19/2019 - 12/18/2019 10:30 AM - 12:00 PM M W Casey Wilson
 

Flint Hills Technical College does not discriminate on the basis of sex including pregnant and parenting students, sexual orientation, handicap, race, color, age, religion, marital status, or national or ethnic origin in educational programs, admissions policies, employment policies, financial aid or other College-administered programs. For questions or concerns regarding non-discrimination contact the Director of Human Resources at 620.343.4600.

Flint Hills Technical College 3301 West 18th Avenue Emporia, KS 66801 620.343.4600
© 2019 - 2020 Flint Hills Technical College

Apply Now